LINK: Color Change in Revit 2012 after Updating Windows 7
February 28, 2013
Did something change with Revit 2012 overnight? No but something did change with Windows! A Microsoft Windows update changes the color scheme in Revit 2012. How to fix? Turn off Hardware Acceleration in Revit 2012 or uninstall a specific Windows update. See link below for more details. However, there may be one more reason for the color change not mentioned in the link below. On one of our lab computers, upgrading to IE10 also affected the color scheme. Revit 2013 is not affected by the Windows update.
LINK: Color Change in Revit 2012 after Updating Windows 7
LINK: Color Change in Revit 2012 after Updating Windows 7
February 18, 2013
Revit Shared Origin Survey Startup Base Location…
What? The title of this blog doesn’t make sense. Now that I
have your attention, here we go. You may
know about Revit’s Project Base Point (PBP) and Survey Point (SP). Did you know
there is another point called the Startup Location? Be default, the PBP and SP
are located on top of the Startup Location. What is the Startup Location used
for? It’s used for linking models ORIGIN-TO-ORIGIN. Revit does not use the PBP to
link models origin-to-origin. How does this work with Shared Coordinates? It doesn’t.
So, keeping Shared Coordinates out of this blog, I want to clarify something
very very important. If you are an engineer and want to link the Architect’s
project file origin-to-origin, you need to do this before you start the
engineering model. This will ensure that the Revit models line up exactly.
However, if a structural engineer lays out column grids without the architects
model and then links files later, origin-to-origin will not work. If this
happens, the only way to deal with linked files is to use Shared Coordinates.
The engineer will only waste time trying to move the PBP and linking models using
origin-to-origin. And finally, never, I
repeat never move the building. I’ve read blogs on how to move a building using
infinite view ranges. This does not work; details items cannot be moved this
way and you will only cause more problems. Again, use Shared Coordinates. I will save Shared Coordinates for
another blog.
February 10, 2013
Preparing for "Next Generation" Manufacturing - and the "End of Days" for the traditional drafter
I generally catch up on my "business" reading on Sunday mornings with a bottomless cup of coffee and jazz, and though it wasn't news to me, an article I read this morning pointed out once again the importance of keeping up with technology and taking some of the associated risks with becoming an "early adopter".
The article, entitled "Are You Prepared for the Next Generation of Manufacturing?", written by Warren Smith (an industry consultant with Infor), is the first of a series being posted on the Industry Week website. The message to manufacturers is that understanding (and in my opinion, adopting) the key technologies leading the industry today is essential to take on the future of manufacturing. In this competitive market, a vendor can't rely on long standing relationships and customer service to hold on to business - loyalty in the rapidly changing future will be dictated by attention to meeting shorter deadlines, better predicting product performance, and providing innovation that companies need before the end users think of it themselves.
I'll go a step further and state that manufacturers had best pay attention to these trends in order to stay competitive, or many will not survive.
First in the author's findings was a stunning fact about the incorporation of the robotic workers - at a labor cost of $4 per hour, a robot can now perform tasks at less than that of an overseas worker. And with a point of entry at around $20k, a robot can provide 3 or more years of service - without the need for health plans, paid vacations, etc. At one time, the robotic worker was a pipe dream for the SMB manufacturing market. Now, it's a viable alternative to placing ads, interviewing people and hoping for a reliable (gast!) human employee.
Second, Mr. Smith discusses how additive manufacturing is lowering development costs, increasing innovation and protecting intellectual property. We've all seen movies and TV shows where a 3D design is pushed to a printer and within seconds the model is in use - though the printers aren't quite that fast, the era of affordable, high detail, and yes, desktop 3D printing is here.
I look forward to the second part of the article, but these two trends alone signal that the days of 2D drafting are nearing the end. After all, you can't virtually test and prototype a design drawn in 2D CAD. So if you're not designing in 3D now, you'd better start soon. Who knows? You could end up designing a "worker" for your company's manufacturing shop floor....
The article, entitled "Are You Prepared for the Next Generation of Manufacturing?", written by Warren Smith (an industry consultant with Infor), is the first of a series being posted on the Industry Week website. The message to manufacturers is that understanding (and in my opinion, adopting) the key technologies leading the industry today is essential to take on the future of manufacturing. In this competitive market, a vendor can't rely on long standing relationships and customer service to hold on to business - loyalty in the rapidly changing future will be dictated by attention to meeting shorter deadlines, better predicting product performance, and providing innovation that companies need before the end users think of it themselves.
I'll go a step further and state that manufacturers had best pay attention to these trends in order to stay competitive, or many will not survive.
First in the author's findings was a stunning fact about the incorporation of the robotic workers - at a labor cost of $4 per hour, a robot can now perform tasks at less than that of an overseas worker. And with a point of entry at around $20k, a robot can provide 3 or more years of service - without the need for health plans, paid vacations, etc. At one time, the robotic worker was a pipe dream for the SMB manufacturing market. Now, it's a viable alternative to placing ads, interviewing people and hoping for a reliable (gast!) human employee.
Second, Mr. Smith discusses how additive manufacturing is lowering development costs, increasing innovation and protecting intellectual property. We've all seen movies and TV shows where a 3D design is pushed to a printer and within seconds the model is in use - though the printers aren't quite that fast, the era of affordable, high detail, and yes, desktop 3D printing is here.
I look forward to the second part of the article, but these two trends alone signal that the days of 2D drafting are nearing the end. After all, you can't virtually test and prototype a design drawn in 2D CAD. So if you're not designing in 3D now, you'd better start soon. Who knows? You could end up designing a "worker" for your company's manufacturing shop floor....
Subscribe to:
Posts (Atom)