Oh No, My Section Marks in Revit Have Disappeared!?
This particular dilemma crops up occasionally. Did some or all section view tags disappear when you changed the scale of the view? Fear not, it is probably not a problem with your view, project or Revit. It is a parameter associated with the section view. When you place a section in a view, it assumes the scale of the view. It also sets the “Hide at scales coarser than” parameter to the same scale. That means if you place sections in a view, then change the scale of that view to be greater than what was originally set to (i.e. your view was set to 1/8”=1’-0” and you change it to 3/32”=1’-0”), your section view tags will disappear. This is a default behavior of section views. To fix this you open the section view, go to the Properties PaletteèHide at scales coarser than parameter and change to allow the section view tags to show at larger scales. This setting is intended to help control the display of section view tags. Sometimes we forget this setting is there until they disappear.