March 27, 2012

Inventor Styles and Standards

A consistent configuration of the Styles and Standards of Inventor in the 2D environment will make you a happy designer and detailer. We all want to be happy designers and detailers, right?

Let's take a look at a simple task you can do to ensure you are making the best use of the Styles Editor. There are many ways to do what I am about to do, but I have found over multiple implementations that this tends be free of headaches in the long haul.


In the Styles Editor, I begin by making a new Style for EVERY existing Standard Style. Yes, every one of them, whether I am customizing it or not. So starting with the top left column, I will expand STANDARD and make a "new" DEFAULT STANDARD but I will prefix the name with, for example, the company name. So in my case, I will make an ASTI_DEFAULT STANDARD. I will continue all the way down thru Balloons, Center Marks, all the way down to Weld Beads. My last "new" style I will create will be named ASTI_WELD BEAD RECOVERY (ANSI).

The new styles I created will then be modified to make the "company standards" for 2D Drawings in Inventor. But we are not done yet...


The OBJECT DEFAULTS Style should have an ASTI_OBJECT DEFAULTS now and if you open it to modify it, you should make the appropriate changes in the OBJECT STYLE column to list all "ASTI_..." styles. None of them should say Default, or Table, etc. They should all start with the company name.

Why go to all this trouble? This ensure that all modifications are not made to the "out-of-the-box" standards but rather the COMPANY standards! Then when you have to make changes to any of the drawing defaults, always go to the MYCOMPANY_STYLE NAME and make your changes.

It is a good bit of up-front work, but in the long run, you will be a much happier designer and detailer, which is what we all want to be. :)

A side note... if you don't want to go thru the process I have explained above, which can be long and tiresome, Applied Software can do this for you as a service! Contact your Applied Software Sales Rep for a quote!


--Scott

1 comment:

  1. Its really good to know about that some facts and other points given here are quite considerable and to the point as well would be better to look for more of these kind.

    Construction Service Management Software

    ReplyDelete

Note: Only a member of this blog may post a comment.